Seismic Source BOOM BOX 3 User Manual

53 BOOM BOX 3 Dynamite Controller
13.4. Autonomous Mode Setup
Autonomous mode operation allows shooters to fire shots independently based on dedicated GPS
time slots. This mode involves more shooter interaction with user interface software than other
conventional modes.
First the Boom Box3 parameters can be set, with the standard parameters and the mode selected to
“Autonomous Decoder”.
13.4.1 Fleet Units Assignment
Once the Operation mode is set to Autonomous Decoder, the Units in the fleet and the record
length (typically listen time) needs to be setup. This allows the Boom Box3 unit to calculate GPS
time slots for firing the shots.

Seismic Source BOOM BOX 3 Specifications

General

Brand	Seismic Source
Model	BOOM BOX 3
Category	Controller
Language	English