Seismic Source BOOM BOX 3 User Manual

User’s Manual
86
• Pulse Low/Closed – Source Control F3 sends start command and BB3 encoder waits for
Remote Start high going low pulse to start.
• Pulse High/Open – Source Control F3 sends start command and BB3 encoder waits for
Remote Start low going high pulse to start.
Recorder Start, Time Break Active, Speaker Polarity and Microphone Polarity are discussed
in the Boom Box 3 Parameter section.
Ref Sample Rate: Use 2000.
Send: Send these menu items to the Boom Box 3 unit.
Receive: Receive these menu items from the Boom Box 3 unit.
Compare: Receive these menu items from the Boom Box 3 unit to compare against program
items.
Save: Save these menu items into a file.
Open: Open a saved menu file.

Seismic Source BOOM BOX 3 Specifications

General

Brand	Seismic Source
Model	BOOM BOX 3
Category	Controller
Language	English