Sencore MRD 5800 - Appendix E -MRD 5800 Dolby Audio Explanation; Appendix E -MRD 5800 Audio Explanation; Appendix F - MRD 5800 Discrete Audio Configuration

MRD 5800 – User Manual
Page 112 (116)
Appendix F – MRD 5800 Discrete Audio Configuration
Audio Setup
Selecting the discrete option differs from downmix in that it simply decodes the selected
audio channels rather than downmixing multiple channels into 2 channels. The service
selection mode from 4.2.8 must be set to PID lock in order to output 3 pairs of audio
(and completely decode a full 5.1 input). Assign the audio pid containing the 5.1 audio
service to 3 seperate audio components. The example below illustrates this with PID
558.
Desired discrete channels can then be selected for the assigned audio as illustrated
below.