MRD 5800 – User Manual
Page 86 (116)
Clicking this button starts the Rollback process.
The MRD 5800 will prompt the user to confirm the
rollback or click cancel to stop the process.
4.3.12 Reboot Unit
The MRD 5800 can be rebooted from the web interface. In order to perform a reboot
click the button. The MRD 5800 will prompt the user to confirm the reboot.
Once the reboot is complete the login screen will appear allowing the web interface to be
logged into.
4.3.13 Reset Defaults
The MRD 5800 settings can be reset to factory defaults. All settings will be returned to
the factory defaults except the network management ports TCP/IP settings. All event
logs will be cleared. To reset all settings to default click the button. The
MRD 5800 will prompt the user to confirm the reset.
To Next Page
Loading...
