Sencore MRD 5800 - Page 24

MRD 5800 – User Manual
Page 24 (116)
Active Input Indicator
Active Input and Failover Configuration Menu
Setting
Range
Description
Primary Input
ASI
MPEG/IP Slot X Stream X
DVB-S2 Slot X Port X
8VSB/QAM Slot X
Turbo PSK Slot X
DVB-T2/C2/ISDB-T Slot X
None
Used for both normal operation and input
failover settings. During normal operation this
input will be the active input.
Backup Input
ASI
MPEG/IP Slot X Stream X
DVB-S2 Slot X Port X
8VSB/QAM Slot X
Turbo PSK Slot X
DVB-T2/C2/ISDB-T Slot X
None
During failover operation this input will
become the active input. The catalyst for
what causes the unit to switch to this input is
configured in the following setting.
Switch On
Manual Only
TS Sync Loss
Manual Only: the unit will not switch inputs
automatically. The user must manually
switch inputs.