Sencore MRD 5800 - Page 54

MRD 5800 – User Manual
Page 54 (116)
Setting
Range
Description
ESAM Processing
Enabled
Disabled
Enable or Disable ESAM processing
POIS URI
Valid String
Specify the address of the POIS server
POIS Timeout (sec)
1-5
Specify a timeout to receive a response from
the POIS
Timeout Behavior
Pass Message
Retry POIS
Discard Message
Specify a behavior that is used by the MRD if
the timeout is reached
Acquisition Point ID
Valid String
Optional reference used by the POIS for
processing
Acquisition Signal ID
Valid String
Optional reference used by the POIS for
processing
State
Enabled
Disabled
Enable or Disable Asynchronous message
insertion
Port
0-65535
Port on which the MRD 5800 will listen for
SCTE 35 messages from the ESAM server
PID
SCTE 35 Pid present
in TS
PID on which the SCTE 35 messages will be
inserted in the transport stream