OmniHub 6/6D– User Manual
Page 102 of 182
this page namely Service Scrambling and CAS1 to CAS6. 6 CAS tabs have the same
interface.
Input the correct CA parameters on this page and make sure the ECMG and EMMG are
connected GREEN. Some CA will provide a Super CAS ID with 8 digits. This is a
combination of the 4-digit CAS System ID and 4-digit of ECMG Sub System ID.
Service Scrambling> On this page, you can encrypt a service in the Modulation Output.
Select a channel for output and you will see a service list. If you simulcrypt 6 different
CA, select one of them for encryption as you need, then select the CA ID of the service.
Click Apply to finish setting.
The Modulation Output Channel will only list the enabled channels but not all 32
channels. If the channels and CA ID to be used are arranged in a chronological order,
you can use Batch Setting for faster encryption. This is advisable if you have 10 or
more services in a single channel for output. See the image below for reference.
To Next Page
Loading...
Need help?
General
