OmniHub 6/6D– User Manual
Page 114 of 182
Service Scrambling> On this page, you can encrypt a service in the Modulation Output.
Select a channel for output and you will see a service list. If you simulcrypt 6 different
CA, select one of them for encryption as you need, then select the CA ID of the service.
Click Apply to finish setting.
The Modulation Output Channel will only list the enabled channels but not all 16
channels. If the channels and CA ID to be used are arranged in a chronological order,
you can use Batch Setting for faster encryption. This is advisable if you have 10 or
more services in a single channel for output. See the image below for reference.
3.5.8.2.5 System
OHM-QAMB-02 System is composed of two sub menus namely Network and License.
Network> Here you can modify the IP Address, Subnet Mask and Gateway for each
port of the module, except for the address of the module itself. This also shows the
MAC Address of each port of the module. See the image below for reference.
To Next Page
Loading...
Need help?
General
