Sencore OmniHub 6 - Page 135

OmniHub 6/6D– User Manual
Page 135 of 182
milliseconds)
Decryption Mode
Disabled
AES-128
AES-192
AES-256
Automatic
Defines if a decryption of the received signal is
needed, which decryption standard to use, or
if the DMG 7000 will automatically detect
these
Decryption Key
User entry
Provides the key to allow signal processing if
decryption is to be done
FEC Overhead (%)
0 – 50
Defines the amount of static overhead to be
used to accommodate FEC
Click the icon by the Zixi input to view information about the incoming
stream. Clicking the icon will hide the Zixi receive statistics.
Zixi Receive Statistics
The button is used to reset all the statistics for incoming
Zixi packets and establish a new point of reference.
HLS Receive Settings
The figure below shows the options available when the “Receive Type” is set to “HLS”