The SL Boundary 114-S DW
154
Charging the boundary microphone using the CHG
2W wireless charging base
To charge the boundary microphone using the CHG 2W
charging base:
►
▷ Place the boundary microphone on the CHG 2W charging
base in the area marked.
If the boundary microphone is positioned correctly on the
charging surface, the alignment LED lights up green.
The LEDs on the CHG 2W charging base flash blue during
charging.
You can find more information about the CHG 2W wireless
charging base under „The CHG 2W charging base“.
To Next Page
Loading...
