SL Rack Receiver DW
78
GA 4 mounting kit
You need the GA 4 mounting kit to install the receiver in a rack.
The GA 4 mounting kit is available separately as an accessory
and is also supplied with the following sets:
• SL Handheld-Set R
• SL Headmic-Set R
• SL Lavalier-Set R
The GA 4 mounting kit consists of:
►
Fastening the mounting angles (to install a receiver)
To fasten the mounting angles:
▷ Unscrew and remove the two recessed head screws on
each side of the receiver.
▷ Secure the mounting angles to the sides of the receiver us-
ing the previously removed recessed head screws.
Make sure that the angled ends of the mounting angles
point forward.
To Next Page
Loading...
