Sequential Prophet X - Low Frequency Oscillators

84 85Play List
Sequential Prophet X User’s Guide
Play List
To create a Play List:
1. Press the play list button.
2. Turn Soft Knob 4 to select set 1.
3. Turn Soft Knob 3 to select list 1.
4. Press Soft Key 1 to select the rst position in the list.
5. Use Soft Knob 1 (bank) and Soft Knob 2 (program) to choose the
program that you want.
6. Press Soft Key 2 to select the second position in the list.
7. Use Soft Knob 1 (bank) and Soft Knob 2 (program) to choose the
program that you want.
8. Press Soft Key 3 to select the third position in the list.
9. Use Soft Knob 1 (bank) and Soft Knob 2 (program) to choose the
program that you want.
10. Press Soft Key 4 to select the forth position in the list.
11. Use Soft Knob 1 (bank) and Soft Knob 2 (program) to choose the
program that you want.
12. Now that you have set up List 1. Repeat as desired to set up List 2, List
3, and List 4, if you want.
13. The Lists that you have just created all reside in Set 1. If you want, turn
Soft Knob 4 to Set 2 and repeat the entire process to create another 4
lists that will then reside in List 2. You can continue doing this for all
10 sets, if you want.
Play lists simply point to stored Factory or User programs. Editing and saving
a program changes that program in memory and, as a result, in any play lists in which
it appears. If you need a program to behave differently in different situations, save
multiple copies of the program edited and named appropriately for each situation.
To export play lists as MIDI SysEx data, use dump all banks in the Global menu.
All the play list data will be exported along with the bank data.
To recall programs from a play list:
1. Press the play list button.
2. Turn Soft Knob 4 to select the Set you want (1-10).
3. Turn Soft Knob 3 to select the List you want (1-4).
4. Use Soft Keys 1-4 to choose the program you want within the currently
selected Set and List.