5
Mechanical installation
Assembly
Operating Instructions – MOVIPRO
®
PHC11A-..M1-..2A-A1/..
37
Mounting the unit
1. Use the mounting brackets to hang the unit on the fixture.
2. Securely fasten the mounting bracket via the bores on the holding fixture using M6
screws.
9797753867
5.2.2 Mounting using the through bores
CAUTION
Risk of injury due to protruding parts.
Minor injuries.
• Wear suitable protective gloves.
NOTICE
External force too high.
Damage to the thread or the screw.
• Do not exceed the maximum tightening torque of 3.2 Nm (28 in-lb).
The unit is equipped with 4 through bores in the corner profiles with a diameter of 6.5
mm (0.26 in) and M8 threads on both sides for installation.
20278543/EN – 09/2014
To Next Page
Loading...
