Name: Sharp MX-C301W
Brand: Sharp
Rating: 4 (1 reviews)

To Next Page

To Previous Page

2-21

COPIER

Contents

Selecting single color copying

When [Single Color] is selected for the color mode, the following screen appears. Touch the desired color and touch the

[OK] key.

Selecting 2 color copying

When [2 Color] is selected for the color mode, the following screen appears. Touch the desired color and touch the [OK]

key.

• When auto mode is used, there may be some originals for which switching between color and black & white does not take

place correctly. In this event, press the [COLOR START] key or the [BLACK & WHITE START] key as appropriate to

manually switch between color and black & white.

• Copying takes place in black & white when the [BLACK & WHITE START] key is pressed, regardless of the color mode

setting.

System Settings (Administrator): Initial Status Settings (Color Mode)

This is used to change the default color mode setting.

System Settings (Administrator): Detect Standard in Auto Color Mode

When the color mode is set to auto, the discrimination point for detecting whether originals are color or black and white can

be set to one of 5 levels.

Color Mode

Single Color

R(Red) B(Blue)G(Green)

C(Cyan) Y(Yellow)M(Magenta)

Color Mode

2 Color

Select a color other than black.

R(Red) B(Blue)G(Green)

C(Cyan) Y(Yellow)M(Magenta)

Other manuals for Sharp MX-C301W

Questions and Answers:

Need help?

Do you have a question about the Sharp MX-C301W and is the answer not in the manual?

General