USEABLE PAPER
Various types of paper are sold. This section explains what plain paper and what special media can be used with the
machine. For detailed information on the sizes and types of paper that can be loaded in each tray of the machine, see
the specifications in the Quick Start Guide and "Paper Tray Settings" (page 7-13) in "7. SYSTEM SETTINGS".
Plain paper, special media
Plain paper that can be used
• SHARP standard plain paper (21 lbs. (80 g/m
2
)). For paper specifications, see the specifications in the Quick Start
Guide.
• Pain paper other than SHARP standard paper (16 lbs. to 28 lbs. (60 g/m
2
to 105 g/m
2
))
Recycled paper, colored paper and pre-punched paper must meet the same specifications as plain paper. Contact
your dealer or nearest SHARP Service Department for advice on using these types of paper.
Types of paper that can be used in each tray
The following types of paper can be loaded in each tray.
*1 When receiving a fax, only plain paper/recycled paper from Tray 1/Tray 2 can be used. Bypass tray cannot be used to print a
received fax.
*2
Heavy Paper : 28 lbs. bond to 80 lbs. cover (106 g/m
2
to 220 g/m
2
) heavy paper
*3 Thin paper from 13 lbs. bond to 16 lbs. bond (55 g/m
2
to 59 g/m
2
) can be used.
Trays 1 to 2 Bypass tray
*1
Plain paper
*1
Permitted Permitted
Pre-printed Permitted Permitted
Recycle Paper
*1
Permitted Permitted
Letter head Permitted Permitted
Pre-punched Permitted Permitted
Color Permitted Permitted
Heavy paper*
2
– Permitted
Labels – Permitted
Glossy paper – Permitted
Transparency film – Permitted
Envelopes – Permitted
Thin paper*
3
– Permitted
Be sure to use the same paper type as set on the machine. If a different paper type is used, printing output may be smudged.
To Next Page
Loading...
Need help?
General
