Name: Sharp MX-C301W
Brand: Sharp
Rating: 4 (1 reviews)

To Next Page

To Previous Page

5-35

SCANNER/INTERNET FAX

Contents

SENDING AN IMAGE IN USB MEMORY MODE

Follow the steps below to send a scanned image to a commercially available USB memory device that has been

connected to the machine. This stores the file in the USB device.

• Use a FAT32 USB memory with a capacity of no more than 32 GB.

• When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot

be changed. To switch to USB memory mode, touch the [Cancel] key in the touch panel and then follow the steps below.

Connect the USB memory to the USB

connector (Type A) on the machine.

Place the original.

• When placing the originals, orient them as shown below.

* To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the

placement orientation in step 4.

• Originals cannot be scanned in succession from both the automatic document feeder and the document glass and

sent in a single transmission.

Document feeder tray

Place the original face up.

Portrait orientation*

Landscape orientation

Document glass

Place the original face down and align the

corner with the tip of the arrow mark in the

top left corner of the document glass scale.

Originals

Other manuals for Sharp MX-C301W

Questions and Answers:

Need help?

Do you have a question about the Sharp MX-C301W and is the answer not in the manual?

General