*1 When a paper feed unit is installed.
*2 When a color-related problem has occurred.
Copy Function Settings
● Disabling of Devices 7-69
X Disabling of Document Feeder Disabled 7-69
X Disabling of Duplex Disabled 7-69
X Disabling of Optional Paper Feed Unit*
1
Disabled 7-69
X Disabling of Tray Settings Disabled 7-69
X Disabling of Color Mode*
2
Disabled 7-69
● Fusing Control Settings 16 - 23 lbs. (60 - 89g/m
2
) 7-69
Item Factory default setting Page
■ Copy Function Settings
7-70
● Initial Status Settings
7-70
X Color Mode Full Color
X Paper Tray Varies depending on the machine
configuration
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output Auto
● Other Settings 7-71
X Copy Exposure Adjustment
7-71 Color 5
Black & White 5
X Add or Change Extra Preset Ratios – 7-71
X Setting a Maximum Number of Copies 999 7-71
X Initial Margin Shift Setting
7-71 Side 1 1/2"
Side 2 1/2"
X Erase Width Adjustment
7-71
Edge Clearance Width 1/2"
X Card Shot Settings
7-71 Original Size X: 3-3/8", Y: 2-1/8"
Fit to Page Set Vertically
X ID Card Copy Setting 1/2" 7-71
X Disabling Deletion of Job Programs Disabled 7-72
X Disabling of Bypass-Tray in Duplex Copy Disabled 7-72
Item Factory default setting Page