Sharp MX-C301W User Manual

2-77
COPIER
Contents
ADDING A WATERMARK TO A COPY (Watermark)
When making a copy, specific text can be added to the copy as a watermark. The color, density, angle, and pages (first
page only or all pages) can be selected for a watermark. The watermark is printed at the center of the paper.
Printing "CONFIDENTIAL" on the paper
The following 12 selections are available for the stamp text.
Three levels can be selected for the density of the watermark.
Seven colors can be selected for the watermark color.
The angle of a watermark can be selected in the range +90 degrees to -90 degrees in increments of 45 degrees.
CONFIDENTIAL PRIORITY PRELIMINARY FINAL
FOR YOUR INFO. DO NOT COPY IMPORTANT COPY
URGENT DRAFT TOP SECRET PLEASE REPLY
1
Touch the [Watermark] key in the stamp selection screen.
See steps 1 to 4 of "GENERAL PROCEDURE FOR USING STAMP" (page 2-61).
2
Touch the key of the watermark that you
wish to use.
CONFIDENTIAL
Cancel
OK
PRIORITYCONFIDENTIAL
DO NOT COPYFOR YOUR INFO.
DRAFTURGENT
FINALPRELIMINARY
COPYIMPORTANT
PLEASE REPLYTOP SECRET
Print Color
All Pages
First Page
Stamp
45
Angle
(+90 ~ -90)
Watermark
Bk
21 3

Sharp MX-C301W Specifications

General

Print Technology	Laser
Print Speed	30 ppm
Max Print Resolution	600 x 600 dpi
Max Scan Resolution	600 x 600 dpi
Copy Speed	30 cpm
Max Copy Resolution	600 x 600 dpi
Fax Capability	Yes
Max Paper Capacity	800 sheets
ADF Capacity	50 sheets
Duplex Printing	Yes
Scanner Type	Color CIS
Standard Paper Capacity	250 sheets
Connectivity	USB, Ethernet, Wi-Fi
Mobile Printing	Yes
Display	7.0-inch color touch-screen LCD
Max Paper Size	8.5 x 14 inches