This section provides information that you should know before using the machine as a copier.
BASE SCREEN OF COPY MODE
Touch the [COPY] key in the touch panel to open the base screen of copy mode.
The base screen shows messages and keys necessary for copying, and settings that have been selected.
(1) Mode Select keys
Use these keys to switch between copy, image send, and
document filing modes.
If you wish to switch to copy mode, touch the [COPY]
key.
(2) [Color Mode] key
Touch this to change the color mode.
☞ COPY COLOR MODES (page 2-20)
(3) Output display
When one or more output functions such as sort or group
have been selected, this shows the icons of the selected
functions.
☞ OUTPUT (page 2-32)
(4) [Exposure] key
This shows the current copy exposure and original type
settings. Touch this key to change the exposure or
original type setting.
☞ CHANGING THE EXPOSURE AND ORIGINAL
IMAGE TYPE (page 2-22)
(5) [Copy Ratio] key
This shows the current copy ratio. Touch this key to
adjust the copy ratio.
☞ REDUCTION/ENLARGEMENT/ZOOM (page 2-24)
(6) [Original] key
Touch this key to enter the original size manually.
If the original size is set manually, the set size appears.
☞ ORIGINAL SIZES (page 2-28)
(7) [Paper Select] key
Touch this key to change the paper (tray) that is used.
The tray, paper size, and paper type will appear. Trays 1
to 2 can also be touched in the paper size display to open
the same screen.
☞ PAPER TRAYS (page 2-10)
(8) Original feed display
This appears when an original is inserted in the
automatic document feeder.
BEFORE USING THE MACHINE AS A
COPIER
To Next Page
Loading...
Need help?
General
