TOUCH PANEL
This section explains how to use the touch panel.
Messages and keys are displayed in the touch panel display to enable various operations to be performed.
• To enter text, see "ENTERING TEXT" (page 1-54).
• Press the [JOB STATUS] key ( ) to display the job status screen. For details, see the chapters for each of the
function in this manual.
• For details about the [HOME] key ( ), see "HOME SCREEN" (page 1-21).
• Press the [SYSTEM SETTINGS] key ( ) to display the system settings menu screen. For information on the screens
and procedures for using the system settings, see "Common Operation Methods" (page 7-4) in "7. SYSTEM
SETTINGS".
Using the touch panel display
Example 1
(1) Mode select keys
Use these keys to switch between copy, image send, and document filing modes.
(2) Settings for each function are easily selected and canceled by touching the keys on the screen with your finger.
When an item is selected, a beep will sound and the item will be highlighted to confirm the selection.
(3) Keys that are grayed out cannot be selected.
When you operate the touch panel, do not accidentally touch areas in the touch panel that are not necessary for the intended
operations.
If touched, the machine may malfunction.
If you touch a key that cannot be selected, a double beep will sound.
To Next Page
Loading...
Need help?
General
