Name: Sharp MX-C301W
Brand: Sharp
Rating: 4 (1 reviews)

To Next Page

To Previous Page

1-33

BEFORE USING THE MACHINE

Contents

TRAY SETTINGS FOR TRAY 1 TO 2

LOADING PAPER AND CHANGING THE PAPER SIZE

A maximum of 250 sheets of paper from size 5-1/2" x 8-1/2" to 8-1/2" x 11" (A5 to A4) can be loaded in trays 1.

A maximum of 500 sheets of paper from size 5-1/2" x 8-1/2" to 8-1/2" x 11" (A5 to A4) can be loaded in trays 2.

Pull out the paper tray.

Gently pull the tray out until it stops.

To load paper, go to step 3. To load a different size of paper, go

to the next step.

Push the pressure plate down, and

adjust the plates in the tray to the length

and width of the paper.

(1) Push the center of the pressure plate down

until it locks into place.

(2) The plate A and B are slide-type guides.

Grasp the locking knob on the guide and

slide the guides until the width that the

paper can be loaded properly.

When setting A4 size paper, set the 2 regulation plates with green color on the left side of the tray before setting the

paper. The plates are contained in the inside storage space of the tray (see illustration below).

Fan the paper.

Fan the paper well before loading it. If the paper is not fanned,

multiple sheets may feed at once and cause a misfeed.

(1)

(2)

Plate B

Plate A

Regulation plate

Storage space

Other manuals for Sharp MX-C301W

Questions and Answers:

Need help?

Do you have a question about the Sharp MX-C301W and is the answer not in the manual?

General