EasyManuals Logo

Sharp MX-C301W User Manual

Sharp MX-C301W
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #654 background imageLoading...
Page #654 background image
7-67
SYSTEM SETTINGS
Contents
Device Control
These settings control devices installed on the machine. Touch the [Device Control] key to configure the settings.
Other Settings
AB/Inch Type Setting
The numbers and units of the default settings and input
ranges that appear in the setting screens can be switched
between inches and AB sizes.
Default Original Size Settings
Specify this setting when a particular original size is
frequently used. The setting will appear in the [Original] key.
Specifying this setting allows the original size setting to be
omitted.
When [None] is selected, the original size does not appear
and must always be set manually.
Original Feeding Mode
The following original feeding modes can be set to
operate by default in copy, Scan to HDD, and image
send modes. When a mode is frequently used, this
saves you from having to select the mode in the special
modes each time you need to use it.
• Mixed Size Original (Same Width)
• Blank Page Skip (image send*)
* Excluding fax mode and Internet fax mode.
Auto Paper Selection Setting
The paper types* that the Auto Paper Selection function will
select can be specified. Select one of the following settings:
• Plain Paper
• Plain and Recycle Paper
•Recycle Paper
The Auto Paper Selection function will not select any paper
types other than the paper types specified with this setting.
* The paper type set for each paper tray using "Paper
Tray Settings" (page 7-13) in the system settings
(general).
Detect Standard in Auto Color Mode
When the color mode is set to auto in copy mode, the
discrimination point for detecting whether originals are
color or black and white can be set to one of 5 levels. To
make it easier to detect a black and white original, adjust
the setting toward [Black & White]. To make it easier to
detect a color original, adjust the setting toward [Color].
Registration Adjustment
If the colors are out of place on the printed surface when
color printing is performed, the print positions of the
colors can be adjusted.
To perform this adjustment, touch the [Auto Adjustment]
key. A message will appear. Touch the [Execute] key.
Mode Settings
Copy
A5, B5, A4,
216mm x 330mm (8-1/2" x 13"),
8-1/2" x 13-2/5" (216mm x 340mm),
216mm x 343mm (8-1/2" x 13-1/2"),
8-1/2" x 11", 8-1/2" x 14", 5-1/2" x 8-1/2",
16K
Image Send
A5, B5, A4,
216mm x 330mm (8-1/2" x 13"),
8-1/2" x 13-2/5" (216mm x 340mm),
216mm x 343mm (8-1/2" x 13-1/2"),
8-1/2" x 11", 8-1/2" x 14", 5-1/2" x 8-1/2",
16K, Long Size
Scan to HDD
A5, B5, A4,
216mm x 330mm (8-1/2" x 13"),
8-1/2" x 13-2/5" (216mm x 340mm),
216mm x 343mm (8-1/2" x 13-1/2"),
8-1/2" x 11", 8-1/2" x 14", 5-1/2" x 8-1/2",
16K, Long Size

Table of Contents

Other manuals for Sharp MX-C301W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp MX-C301W and is the answer not in the manual?

Sharp MX-C301W Specifications

General IconGeneral
Print TechnologyLaser
Print Speed30 ppm
Max Print Resolution600 x 600 dpi
Max Scan Resolution600 x 600 dpi
Copy Speed30 cpm
Max Copy Resolution600 x 600 dpi
Fax CapabilityYes
Max Paper Capacity800 sheets
ADF Capacity50 sheets
Duplex PrintingYes
Scanner TypeColor CIS
Standard Paper Capacity250 sheets
ConnectivityUSB, Ethernet, Wi-Fi
Mobile PrintingYes
Display7.0-inch color touch-screen LCD
Max Paper Size8.5 x 14 inches

Related product manuals