4
Select Stamp.
For detailed information on each of the stamp items, see the
following sections:
Date: ADDING THE DATE TO COPIES (Date)
(page 2-64)
Stamp: STAMPING COPIES (Stamp) (page 2-66)
Page numbering: PRINTING PAGE NUMBERS ON COPIES
(Page Numbering) (page 2-68)
Text: PRINTING TEXT ON COPIES (Text) (page
2-71)
Watermark: ADDING A WATERMARK TO A
COPY (Watermark) (page 2-77)
5
When you have finished selecting stamp
settings, touch the key.
6
Select settings for the original .
(1) Touch the [Original Orientation] key and
specify the orientation of the placed
original.
If 2-sided originals have been placed, touch the
key and specify the binding position (booklet binding or
tablet binding) of the originals.
(2) Touch the [OK] key.
You will return to the base screen of copy mode.
To edit a stamp position or delete a stamp item, touch the
[Layout] key.
☞CHECKING THE STAMP LAYOUT (Layout) (page
2-75)
7
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then
touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first
original.
• If you selected printing in color, press the [COLOR START] key. Even if a color is selected, pressing the [BLACK &
WHITE START] key will print the stamp items in black and white.
• If a color print setting is selected, the copy will be counted as a full color copy even if it is black & white.
To cancel scanning and copying...
Press the [STOP] key ( ).
To Next Page
Loading...
Need help?
General
