Storing group keys
This section explains the procedure for storing group keys.
Items appearing when a Direct SMTP address is stored
• Direct SMTP Address
• Add Hostname or IP Address Too
• Hostname or IP Address
Use these three settings to set an address for Direct SMTP transmission.
In many cases, transmission is possible using method (1).
A maximum of 64 characters each can be entered in the "Direct SMTP Address" and
"Hostname or IP Address" text boxes.
(1) Using the IPv4 address of the receiving machine in the domain part of the
e-mail address
Enter the e-mail address of the receiving machine in the [Direct SMTP Address]
text box with the IPv4 address substituted for the domain.
Example:When the e-mail address of the receiving machine is
"user@sample_domain.com" and the IPv4 address is "192.168.123.45"
Enter "user@192.168.123.45" in the [Direct SMTP Address] text box.
(2) Using the host name in the domain part of the e-mail address of the
receiving machine
Enter the e-mail address of the receiving machine in the [Direct SMTP Address]
text box with the host name substituted for the domain.
Example:When the e-mail address of the receiving machine is
"user@sample_domain.com" and the host name is "HOST"
Enter "user@HOST" in the [Direct SMTP Address] text box.
(3) When the receiving machine is set to only receive e-mail from specific
addresses
Enter the specified specific e-mail address in the [Direct SMTP Address] text box.
Select the "Add Hostname or IP Address Too" checkbox and enter the host name
or IPv4 address of the receiving machine in the [Hostname or IP Address] text box.
Example:When the e-mail address of the receiving machine is
"user@sample_domain.com" and the IPv4 address is "192.168.123.45"
Enter "user@sample_domain.com" in the [Direct SMTP Address] text
box and enter "192.168.123.45" in the [Hostname or IP Address] text
box.
File Format Compression Mode: Select the compression mode for transmission.
Items appearing when a group is stored
Address
• Address: Select addresses from the address book to be stored in the
group.
• Direct Entry: An address that is not stored in the address book can be directly
entered. Enter the address in the same way as when storing an
address for a mode. Note that when an Internet fax address is
directly entered, the compression mode and reception report
cannot be selected.
• Address Review: This displays a list of the selected addresses. Addresses can be
deleted from this list if needed.
1
Touch the [Address Control] key.
Item Description
To Next Page
Loading...
Need help?
General
