EasyManuals Logo

Sharp MX-C301W User Manual

Sharp MX-C301W
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #734 background imageLoading...
Page #734 background image
8-29
TROUBLESHOOTING
Contents
PROBLEMS RELATED TO ONE-TOUCH INDIVIDUAL
KEYS / GROUP KEYS
The image is too light
or too dark.
(When using PC
Scan.)
Is the threshold value suitable? Check the "B/W Threshold" setting.
When scanning from the TWAIN driver with [Mono 2
gradation] selected from the [Color Mode] of the
"Custom Settings" window, check the "B/W Threshold"
setting. A large threshold value makes the image darker
and a small threshold value makes the image brighter.
To adjust the "B/W Threshold" automatically, click the
[Auto Threshold] button on the [Image] tab of the
"Custom Settings" window.
Are the brightness and contrast settings
suitable?
When the brightness and contrast settings are not
suitable (for example, the scanned image is too bright),
click the [Auto Brightness / Contrast Adjustment] button
on the [Color] tab of the "Custom Settings" window. You
can also click the [Brightness / Contrast] button to set
the brightness and contrast while viewing the scanned
image.
Problem Point to check Solution
A one-touch individual
key or group key
cannot be stored.
Has the maximum number of keys been
stored?
Adjust the number of stored keys.
Delete one-touch keys (or group keys) that are not
being used.
Have functions been disabled by the
administrator?
Check with your administrator.
Some functions may have been disabled in the system
settings (administrator).
A one-touch individual
key or group key
cannot be edited or
deleted.
If the key is an individual key, is the key
included in a group?
Remove the key from the group and then edit or
delete the key.
(If the key is included in multiple groups, it must be
removed from all groups.)
âžž
System Settings > "Address Control" > "Address Book"
If multiple group keys have been stored, print the Group
List in "Sending Address List" in the system settings.
The list will show where the key is stored.
âžž System Settings > "List Print (User)" > "Sending
Address List" > "Group List"
Is the key being used in a reserved
transmission or a transmission in
progress?
Wait until the transmission is finished or cancel the
transmission and then edit or delete the key.
Problem Point to check Solution

Table of Contents

Other manuals for Sharp MX-C301W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp MX-C301W and is the answer not in the manual?

Sharp MX-C301W Specifications

General IconGeneral
Print TechnologyLaser
Print Speed30 ppm
Max Print Resolution600 x 600 dpi
Max Scan Resolution600 x 600 dpi
Copy Speed30 cpm
Max Copy Resolution600 x 600 dpi
Fax CapabilityYes
Max Paper Capacity800 sheets
ADF Capacity50 sheets
Duplex PrintingYes
Scanner TypeColor CIS
Standard Paper Capacity250 sheets
ConnectivityUSB, Ethernet, Wi-Fi
Mobile PrintingYes
Display7.0-inch color touch-screen LCD
Max Paper Size8.5 x 14 inches

Related product manuals