MX-M700N SIMULATION 7 – 68
66-24
Purpose
Clear
Function (Purpose)
Used to clear the FAST memory data.
Section
FAX
Operation/Procedure
1) Select YES/NO of data clear.
2) Press [START] key.
66-25
Purpose
Setting
Function (Purpose)
Used to register the FAX number for
Modem dial-in. (Only when FAX is installed)
Not used in the market. (For development)
Section
FAX
Operation/Procedure
1) Enter the Modem dial-in FAX number (1 - 9, 0, *, #) with 10-
key.
2) Press [START] key.
66-26
Purpose
Setting
Function (Purpose)
Used to register external telephone num-
bers for Modem dial-in. (Only when FAX is
installed) Not used in the market. (For
development)
Section
FAX
Operation/Procedure
1) Enter the Modem dial-in FAX number (1 - 9, 0, *, #) with 10-
key.
2) Press [START] key.
66-27
Purpose
Setting
Function (Purpose)
Used to register the transfer number for
voice warp. (Only when FAX is installed)
Not used in the market. (For development)
Section
FAX
Operation/Procedure
1) Enter the voice warp transfer number (1 - 9, 0, *, #) with 10-
key.
2) Press [START] key.
66-28
Purpose
Setting
Function (Purpose)
Used to record voice messages. (Only
when FAX is installed.)
Section
FAX
Operation/Procedure
1) Enter the number corresponding to the registration number
with 10-key.
2) Use the handset to record a voice message. (Max. 6sec)
3) Onhook the handset. (End)
There are following five kinds of recording.
When [SYSTEM SETTING] key is pressed, recording is inter-
rupted.
66-29
Purpose
Clear
Function (Purpose)
Used to clear data related to an address
book (one-touch registration, program reg-
istration/expansion, relay memory box reg-
istration, each table content).
Section
FAX, Network scanner
Operation/Procedure
1) Select YES/NO of data clear.
2) Press [START] key.
1 YES FAST memory data is cleared
2 NO Not cleared.
SIMULATION 66-24
FAST MEMORY DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
SIMULATION 66-25
M-D-IN FAX NUMBER SETTING. 0-9:[0-9],*:[*],#:[#]
INPUT NUMBER AND PRESS START.
0123456789*#01234567
SIMULATION 66-26
M-D-IN EXTEL NUMBER SETTING. 0-9:[0-9],*:[*],#:[#]
INPUT NUMBER AND PRESS START.
0123456789*#01234567
1 MESSAGE1 Recording No. 1
2 MESSAGE2 Recording No. 2
3 MESSAGE3 Recording No. 3
4 MESSAGE4 Recording No. 4
5 MESSAGE5 Recording No. 5
1 YES Address book data is cleared.
2 NO Not cleared.
SIMULATION 66-27
V-WP TRANSMIT NUMBER SETTING. 0-9:[0-9],*:[*],#:[#]
INPUT NUMBER AND PRESS START.
0123456789*#01234567
SIMULATION 66-28
VOICE RECORD. SELECT 1-5, AND PRESS START.
1.MESSAGE1 2.MESSAGE2 3.MESSAGE3
4.MESSAGE4 5.MESSAGE5
1
SIMULATION 66-29
ADDRESS DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
To Next Page
Loading...
