MX-M700N EXTERNAL VIEW AND INTERNAL STRUCTURE 5 – 2
B. Internal operation parts
No.
Parts
NOTE
Name Funciton/Operation
1 Duplex unit Open the cover to remove a misfeed from the fusing/duplex unit.
2 Fusing unit Toner images are fused here. The fusing unit is hot. Take care in
removing misfed paper.
3 Cover of the duplex unit Open when a misfeed has occurred in the duplex unit.
4 Toner cartridge The toner cartridge must be replaced by the indication on the operation panel.
5 Main power switch Keep this switch turned on when the fax option or network scanner option is installed.
6 Right side cover Open when a misfeed has occurred in bypass tray or large capacity tray.
7 Upper cover of large
capacity tray
Open when a misfeed has occurred in large capacity tray.
8 Left side cover release Push this knob up to open the left side cover.
9 Left cover of paper
drawer
Open this cover to remove paper misfed in the tray 3 and tray 4.
10 OPC drum Images are formed on the photoconductive drum. Do not touch or damage the
photoconductive drum.
12 3 45
6
7
89
10
To Next Page
Loading...
