Sharp MX-M700N - DSPF Paper Transport Roller 3 Brake Clutch

MX-M700N DSPF SECTION C – 16
(2) DSPF paper transport roller 3 brake clutch
(3) DSPF paper transport roller 3 clutch
1) Remove the rear cover. (See “A-(1)-a. Cabinet”)
2) Remove the connecters.
3) Remove the connecter base.
4) Remove the super snap band to remove the cable.
5) Remove the resin E-ring, and remove the DSPF paper trans-
port roller 3 brake clutch (A), and the DSPF paper transport
roller 3 clutch (B).
(4) No.2 resist roller (Drive)
1) Remove the cabinet. (See “A-(1)-a. Cabinet”)
2) Remove the document tray unit.
(See “B-(1) Document tray unit”)
3) Remove the resin E-ring, and jam disengage knob.
4) Remove the electromagnetic clutch.
(See “E-(2) DSPF paper transport roller 3 brake clutch”)
5) Remove the rear side bearing to remove the resin E-ring
spacer.
A
B