Sharp MX-M700N - Page 328

MX-M700N DUPLEX SECTION H – 5
4) Remove the left door unit.
a. ADU opening/closing door
1) Pull out the left door.
2) Remove the stopper section plastic E-ring.
3) Remove the stopper from the fulcrum shaft to remove the
opening/closing door in the arrowed direction.
b. Paper exit roller 2
1) Pull out the left door.
2) Remove the ADU opening/closing door.
3) Remove the ADU paper exit upper paper guide.
4) Remove the ADU brake collar.
5) Remove the E-ring to remove the transport roller 2 assembly.
6) Remove the E-ring to remove the bearing, pulley, gear and pin
from the paper exit roller.
c. Transport roller 19
d. Transport roller 20
e. Transport roller 21
1) Pull out the left door.
2) Remove the ADU opening/closing door.
3) Remove the left door cabinet F.
4) Remove the left door cabinet R.