Sharp MX-M700N - Page 392

MX-M700N DRIVE SECTION P – 12
4) Disconnect the connector, and remove the paper feed clutch
unit.
5) Remove the E-ring, and remove the paper feed clutch.
b. Paper feed clutch (Paper feed tray 4)
1) Remove the 3/4 paper feed drive unit.
(See “(1) 3/4 paper feed drive unit”)
2) Remove the 3/4 drive frame lower.
(See “a. Paper feed clutch (Paper feed tray 3)”)
3) Disconnect the connector, and remove the paper feed clutch
unit.
4) Remove the E-ring, and remove the paper feed clutch.
c. Paper feed tray 3/4 paper transport clutch 1
1) Remove the 3/4 paper feed drive unit.
(See “(1) 3/4 paper feed drive unit”)
2) Remove the parts, and remove the belt.
3) Remove the 3/4 drive frame lower.
(See “a. Paper feed clutch (Paper feed tray 3)”)
4) Disconnect the connector, and remove the paper feed tray 3/4
paper transport clutch 1 unit.