2-24
COPIERâ–ºBASIC PROCEDURE FOR MAKING COPIES
Specifying the image dimensions
1
Tap the [Detail] key to change to normal mode.
â–º CHANGING MODES (page 1-19)
2
Tap the [Copy Ratio] key.
3
Tap the [by Size] key of the [Zoom] tab.
4
Specify the image size (dimensions of
the image to be enlarged or reduced)
and the output size (dimensions of the
enlarged and reduced images).
Tap the area of image size and output size, and enter the
sizes using the numeric keys.
After the settings are completed, tap .
• If you have entered an incorrect size:
Tap the [C] key, and then enter the correct size.
• To cancel all settings:
Tap the [CA] key.
( 25~400 )
%
Others
Other Ratio by Paper by Size
1
2-Sided Copy
Background Adjustment
Change Paper Feed Tray
Paper Select
Change Size/Direction.
Original
Copy Ratio
Slightly Reduce
(3% Reduction)
XY Zoom
Auto Image
Zoom
64%
77%
129%
100%
100
No. of copies
121%
11x17->8 1/2x11
8 1/2x11->5 1/2x8 1/2
11x17->8 1/2x14
8 1/2x14->8 1/2x11
8 1/2x14->11x17
8 1/2x11->11x17
5 1/2x8 1/2->8 1/2x11
Proof Copy
CAPreview
Start
411x17
3
8½x14
8½x11
Proof Copy
CAPreview
Start
2-Sided Copy
Background Adjustment
Change Paper Feed Tray
Paper Select
Change Size/Direction.
Original
Slightly Reduce
(3% Reduction)
Others
by Size
The copy ratio is calculated from specified sizes.
Enter the image size and the finished size.
Copy Ratio
Source Output
Input Input
0
mm mm
1
No. of copies
%
Copy Ratio
411x17
3
8½x14
8½x11
To Next Page
Loading...
Need help?
General
