8-75
SYSTEM SETTINGSâ–ºSYSTEM SETTINGS
Disabling of Offset
Disable offset output.
Disabling of Stapler
This setting is used to prohibit the use of staple, such as when the staple of inner finisher, finisher or saddle finisher
malfunctions.
Disabling of Punch
This setting is used to prohibit the use of punch, such as when the punch module of finisher or saddle finisher
malfunctions.
Disabling of Document Feeder
Use this setting to prohibit the use of the automatic document feeder, such as when the feeder malfunctions. (When the
setting is enabled, scanning is still possible using the document glass.)
Disabling of Large Capacity Cassette
This setting is used to disable the large capacity cassette, such as when it malfunctions.
Disabling of Optional Paper Drawer
This setting is used to disable the optional paper drawer, such as when it malfunctions.
Disabling of Tray Settings
This setting is used to prohibit tray settings (except for the bypass tray).
Disabling of Inserter
Disables use of the inserter.
Disabling of Finisher
This setting is used to prohibit the use of inner finisher, finisher or saddle finisher, such as when it malfunctions.
Disabling of Folding Unit
This setting is used to disable the folding unit.
Disabling of Trimming Module
This setting is used to disable the trimming module.
Machine Identification Settings
Enter a name or code to identify the machine.
You can use the saddle folding with the saddle finisher even if the folding unit is disabled.
To Next Page
Loading...
Need help?
General
