50
3.3 RES Gain
The peaks normally become fatter when AC is applied. The RES Gain parameter
corrects for this effect. It is set during auto-tuning and does not need to be
adjusted.
3.4 AC1, AC Coeff, RES Coeff
Linear AC application is inadequate in the medium mass-number range when AC
is first applied. These parameters correct for this effect.
This correction is conducted from the mass number indicated for MZ AC0 up to the
value of AC1. The mass number at which AC becomes AC1 is displayed as MZ
AC1.
AC Coeff and RES Coeff represent 100 times the order of the AC correction curve.
A value of 100 represents a straight line.
To Next Page
Loading...
Need help?
General
