Shimadzu GCMS-QP2010 User Manual


53
3. Troubleshooting
Problems when turning the power on
1. MS does not turn on
2. Abnormal Status LEDs
Problems when running software
3. Cannot connect to MS
4. Cannot connect to GC
Problems when starting evacuation
5. No ready status after automatic start
6. Pirani gauge, IC value too high, IG does not light
7. Loud noise
Problems during tuning
8. No peaks obtained
9. Ion-source temperature does not rise or rises too high
10. Error displayed after filament turns on

Shimadzu GCMS-QP2010 Specifications

General

Brand	Shimadzu
Model	GCMS-QP2010
Category	Laboratory Equipment
Language	English