Shini SG-23 Series User Manual

100(107)
6. Maintenance and Repair
All maintenance should be done by professional personnel, so as to avoid
personal injury and machine damage.
1. Check whether the emergency stop button works normally. Period: Daily.
2. Check whether the start/stop button works normally. Period: Daily.
3. Check whether the safety switch works normally. Period: Daily.
4. Check whether the gate circuit breaker works normally. Period: Daily.
5. Check the material defender before starting. Period: Daily.
6. Check whether the screws on the feed box and cutting chamber are tighten
before starting. Period: Weekly.
7. Check whether there is metal in the cutting chamber before starting. Period:
Daily.
8. Check the whether the front door is locked tight before starting. Period:
Daily.
9. Check whether the electrical elements in the electric control box are loose.

Shini SG-23 Series Specifications

General

Brand	Shini
Model	SG-23 Series
Category	Industrial Equipment
Language	English