19(107)
Water inlet
1.4.2 Transportation and Storage of the Machine
Transportation
1) SG-23/30 series of granulator are packed in crates or plywood cases with
wooden pallet at the bottom, which is suitable for quick positioning by fork lift.
2) Equipped with castors for ease of movement after being unpacked.
3) Do not rotate the machine and avoid collision with other objects during
transportation to prevent improper functioning.
4) The structure of the machine is well-balanced and possess good handling
devices, however，it also should be handled with care when lifting the
machine to prevent falling down.
5) The machine and its attached parts can be kept with a temperature from -25
℃ to +55℃ for long distance transporotation while for a short distance, it
can be transported with temperature under +70℃.
Storage
1) SG-23/30 series should be stored indoors with temperature kept from 5℃to
40℃ and humidity lower than 80%.
2) Cut off all power supply and turn off main power switch.
3) Keep the whole machine, especially the electrical components away from
water to avoid potential troubles caused by the water.
4) Use plastic film to cover the machine tightly to prevent the machine from dust
and rainwater.
Working environment
Indoors with a dry environment of maximum temperature +45℃ and humidity
no more than 80%
Do not use the machine:
1) If it is with a damaged cord.
2) On a wet floor or when it is exposed to rain to avoid electric shock.
To Next Page
Loading...
Need help?
General
