13(107)
● For granulating fiber reinforced material, increase fiber reinforced
granulator model for choose. Adopt surface-hardening treatment on the
material contacting components. SG-30 fiber reinforced model blade
material used V-4E joint with S50C.
● Dust separator, full-receiver alarm device and special screens.
All service work should be carried out by a person with technical training or
corresponding professional experience. The manual contains instructions for both
handling and servicing. Chapter 6 contains service instructions intended for service
engineers. Other chapters contain instructions for the daily operator.
Any modifications of the machine must be approved by SHINI in order to avoid
personal injury and damage to machine. We shall not be liable for any damage
caused by unauthorized change of the machine.
Our company provides excellent after-sales service. Should you have any problem
during using the machine, please contact the company or the local vendor.
Headquarter and Taipei factory：
Tel: (886) 2 2680 9119
Shini Plastics Technologies (Dongguan), Inc：
Tel: (86) 769 8111 6600
Shini Plastics Technologies India Pvt.Ltd.：
Tel: (91) 250 3021 166
To Next Page
Loading...
Need help?
General
