2
P
P
r
r
e
e
f
f
a
a
c
c
e
e
Thank you for the purchase of our Programmable Controller PCD-33A.
This manual contains instructions for the mounting, functions, operations and notes when
operating the PCD-33A.
For confirmation of the model and specifications, please read this manual carefully before
starting operation.
To prevent accidents arising from the misuse of this controller, please ensure
the operator using it receives this manual.
Notes
• This instrument should be used according to the specifications described in the manual.
If it is not used according to the specifications, it may malfunction or cause fire.
• Be sure to follow the warnings, cautions and notices. If not, it could cause serious injury
or malfunction.
• Specifications of the PCD-33A and the contents of this instruction manual are subject to
change without notice.
• Care has been taken to assure that the contents of this instruction manual are correct, but if
there are any doubts, mistakes or questions, please inform us through the shop where you
purchased the unit.
• Any unauthorized transfer or copying of this document, in part or in whole, is prohibited.
• Shinko Technos CO., LTD. is not responsible for any damages or secondary damages
incurred as a result of using this product, including any indirect damages.
Safety precautions
(Be sure to read these precautions before using our products.)
The safety precautions are classified into categories: “Warning” and “Caution”.
Depending on circumstances, procedures indicated by Caution may be linked to serious
results, so be sure to follow the directions for usage.
Warning
Procedures which may lead to dangerous conditions and cause death or serious
injury, if not carried out properly.
Procedures which may lead to dangerous conditions and cause superficial to medium
injury or physical damage or may degrade or damage the product, if not carried out
properly.
Caution
To Next Page
Loading...
