Fish Finder alarms
The Fish Finder alarm is available only when a compatible echo sounder module is connected
to the chart plotter.
Fish Finder alarms include:
●Shallow water alarm: triggered, when depth, detected by Fish Finder transducer is too
shallow.
●Deep water alarm: triggered, when depth, detected by Fish Finder transducer is too
deep.
●Water temperature alarm: triggered, when water temperature, detected by Fish Finder
transducer is within or outside the specied range.
●Fish alarm: triggered when sh of the selected size (Small, Middle, Big, Huge) is
detected by Fish Finder.
●Fish Finder alarms are turned o by default. Consider setting them up before beginning
shing.
To Next Page
Loading...
