SICK GM32 - Digital Inputs; Digital Outputs

Operation (Specialist Menus)
GM32 · Technical information · 8011923 · V1.4 · © SICK AG 39
Subject to change without notice
4.2.3.9 Digital inputs
Menu: GM32/Parameter/Digital input
4.2.3.10 Digital outputs
Menu: GM32/Parameter/Digital output
Source Action
Check_cycle Triggers operating mode switch to “Check cycle”
Disable_check_cycle Suppresses the check cycle
Maintenance Triggers operating mode switch to “Maintenance”
No_function No function assigned
Output_control_values Outputs control values
Purge_air Purge air monitoring
Inverted Inverts the signal
Signal Cause
Failure A malfunction has occurred
Maintenance_Request A maintenance request is available
Uncertain The GM32 is in an indefinite state
Not_measuring Zero adjust is running
Check cycle is running
Operating mode ’’Maintenance’’
Operating mode ’’Boxmeasuring’’ (filter box measurement)