SICK GM32 - Check Cycle; Sensor Values

Operation (Specialist Menus)
GM32 · Technical information · 8011923 · V1.4 · © SICK AG 47
Subject to change without notice
4.2.5.3 Check cycle
Menu: GM32/Diagnosis/Check cycle
The check cycle values are the values measured during the last check cycle. “Zero” means
no check cycle has been performed yet.
● Zero: Zero point as physical and current value
● Span: Control point as physical and current value relative to the upper measuring range
value
4.2.5.4 Sensor values
Menu: GM32/Diagnosis/Sensor values
Spectral analysis
Menu: GM32/Diagnosis/Sensor values/Spectral evaluation
● Sources and values for spectral evaluation
The check values are set to “Zero” during a restart.