SICK VMS4200

SYSTEM DESCRIPTION 3
15
8022965-17I6/2020-03-19|SICK
Subject to change without notice
ORIGINAL OPERATING INSTRUCTIONS| VMS4200/5200 (Multicontroller)
Fig. 2: VMS4200/5200 (Multicontroller) with deflector mirror
Legend
1 LMS4x21 2D LiDAR sensors with laser protective cover
2 Deflector mirror
• If the 2D LiDAR sensors cannot be mounted at the prescribed minimum height, the
measurement points can be captured by a deflector mirror mounted parallel to the
2D LiDAR sensors.
• The resulting extension of the light path means that you can save space when
mounting the 2D LiDAR sensor on the conveying equipment.
• The deflection via the mirror is free of loss thanks to its special surface metallization,
as this rules out light refraction.
• The upper figure shows a visualization example of the arrangement of the 2D LiDAR
sensors and the deflector mirror over the transport belt.
• Other system constructions and the operating principle of the VMS4200/5200
(Multicontroller) correspond to the specifications of the type examination certificate.
NOTE! These operating instructions describe system variant without deflector mirror.
System variant
with deflector mirror