SICK VMS4200

ELECTRICAL INSTALLATION 5
71
8022965-17I6/2020-03-19|SICK
Subject to change without notice
ORIGINAL OPERATING INSTRUCTIONS| VMS4200/5200 (Multicontroller)
5.1.2 VMS4200/5200 (Multicontroller)
Fig. 63: Connection overview for the VMS4200/5200 (Multicontroller)
Legend
1
2D LiDAR sensor (master)
1a
CAN bus
1b
Increment and synchronization
1c CAN bus
1d
Ethernet
2 2D LiDAR sensor (slave)
2a
Synchronization
2b Ethernet
3
LFT display - VMS5200 (Multicontroller) only
3a
Ethernet
4
Cabinet
4a Feed 100 ... 264 V AC / 50 ... 60 Hz
5
SIM2000 dimensioning controller
5a
CAN bus
6
SIM2000 system controller
7 Ethernet switch
7a
Ethernet connection to the system controller
7b
Ethernet connection to the dimensioning controller
8
Incremental encoder
8a Encoder signal
9
Photoelectric retro-reflective sensor (optional)
9a
Trigger signal
10
Customer server
10a Data output via Ethernet, fieldbus, or serial connection
11
Reading station (optional)
11a
CAN bus
12
Weighing station (optional)
12a Data connection