SICK VMS4200

ELECTRICAL INSTALLATION 5
73
8022965-17I6/2020-03-19|SICK
Subject to change without notice
ORIGINAL OPERATING INSTRUCTIONS| VMS4200/5200 (Multicontroller)
5.2.2 VMS4200/5200 (Multicontroller)
Fig. 65: Pin assignment of the -X100 terminal block in the cabinet
Terminal Color Signal Function
-X100/1.1 Gray L Line voltage 100…264 V AC / 50…60 Hz
(phase)
-X100/1.4 Blue N Line voltage 100 ... 264 V AC / 50 ... 60 Hz
(neutral conductor)
-X100/1.6 Green-
yellow
PE Protective conductor
Tab. 10: Pin assignment of the -X100 terminal block in the cabinet
NOTE!
▸
Make sure that cables are securely connected.
No visible metal surfaces are permitted on the wires.
▸
Tighten the coupling nuts to provide strain relief on the cabinet. Doing so also
maintains the enclosure rating.