SICK VMS4200

COMMISSIONING 6
95
8022965-17I6/2020-03-19|SICK
Subject to change without notice
ORIGINAL OPERATING INSTRUCTIONS| VMS4200/5200 (Multicontroller)
6.2.6 Saving the parameters permanently
All parameters entered in SOPAS are transferred to and executed on the connected
system controller with the Immediate download option. However, the data is only saved
temporarily in the system controller.
▸
Click on the Save parameters permanently icon in the SOPAS toolbar.
The configuration is transferred to the system controller and saved there permanently.
This configuration is loaded whenever the system controller is restarted.
▸
Click on the Save project button in the project window SOPAS toolbar.
▸
Choose a directory and file name and then confirm.
The settings are saved on the PC in a configuration file with the format *.spr.
NOTE! The settings within this file can be loaded subsequently (if required) and
transferred to the system controller.
Saving the
configuration in the
non-volatile memory
Saving the
configuration
on the PC