3 SYSTEM DESCRIPTION
8022965-17I6/2020-03-19|SICK
ORIGINAL OPERATING INSTRUCTIONS| VMS4200/5200 (Multicontroller)
Subject to change without notice
3.6.4 LFT display
Fig. 43: User interface of the LFT display
Legend
1 Menu bar with individual tabs
2 Display pane
• When operating in a legal for trade application, the VMS5200 (Multicontroller) also
includes a separate LFT display
• To control the display, gently touch the respective button (touchscreen).
NOTE! Only touch the display with your fingers. Do not apply pressure, and do not use
pointed objects.
• Is used to display the measurement results during operation.
• Allows the display of status information, firmware versions and the logbook (version
history) for market surveillance.
NOTE! Measurement and system data cannot be edited.
Fig. 44: LFT display – display of the measurement results
• Visualizes the results of the last measurement.
• The length, width, and height are outputted with scale values in mm.
• The status provides additional information about the measurement result.
Valid measurement results have the status 0 0 0 0. Other numerical sequences
indicate the reason why a measurement was invalid.
Features
Function
MEASUREMENT
To Next Page
Loading...