3 SYSTEM DESCRIPTION
8022965-17I6/2020-03-19|SICK
ORIGINAL OPERATING INSTRUCTIONS| VMS4200/5200 (Multicontroller)
Subject to change without notice
3.2.1 LMS4x21 2D LiDAR sensors
Fig. 3: LMS4x21 2D LiDAR sensors with LFT display - VMS5200 (Multicontroller) only
Legend
1 LMS4x21 2D-LiDAR sensor
2 Laser protective cover
3 LFT display for billing-capable VMS5200 (Multicontroller) measurement
systems
• Consists of two 2D LMS4x21 LiDAR sensors with laser protective covers that
are mounted on a profile and located on the right and left above the conveyor.
• The LMS4x21 2D LiDAR sensors are configured as master and slave.
• Used to calculate the relevant object dimensions by detecting the object on flat
conveying systems without making contact.
• VMS5200 measurement systems (Multicontroller) operating in legal for trade
applications also have a separate LFT display to show the measurement results,
status information, firmware version, and the logbook (version history).
Features
Function
LFT display
To Next Page
Loading...