SICK VMS4200

SYSTEM DESCRIPTION 3
45
8022965-17I6/2020-03-19|SICK
Subject to change without notice
ORIGINAL OPERATING INSTRUCTIONS| VMS4200/5200 (Multicontroller)
The security seal is analogous to the one used for the SIM2000 system controller.
Fig. 35: Security seal on the SIM2000 dimensioning controller (VMS5200 (Multicontroller) only)
Legend
1 Manipulation guard
2 Security seal on the manipulation guard
3 Security seal on the service flap
4 Data line protected against removal
5 Shielded cable entries (typically signal supplies X1 to X4)
A manipulation protective plate protects the Ethernet switch installed in the cabinet
against disassembly and removal of the connecting cables.
Fig. 36: Ethernet switch security seals
Legend
1 Manipulation guard.
2 Security seal on the manipulation plate.
Security seal on the
SIM2000 dimensioning
controller (VMS5200
Multicontroller only)
Security seal on the
Ethernet switch