SICK VMS4200

3 SYSTEM DESCRIPTION
52
8022965-17I6/2020-03-19|SICK
ORIGINAL OPERATING INSTRUCTIONS| VMS4200/5200 (Multicontroller)
Subject to change without notice
• Displays the parameter checksum history for all LFT-relevant devices (SIM2000,
LMS4x21 and LFT display).
• Accessed via the HISTORY button in the Parameter Checksum column.
Fig. 47: LFT display – display of the parameter checksum history
For the VMS5200 (Multicontroller), the VERSION tab at the top displays the current
firmware version, the associated firmware checksum, and the parameter checksum
of the SIM2000 system controller, SIM2000 dimensioning controller, and LFT display.
The current firmware version, the associated firmware checksum, and the parameter
checksum of the two LMS4x21 sensors are displayed in the bottom area of the window.
The respective sections of the screen can be scrolled into view using the scrollbar. The
screenshot in the following figure gives an overview of all the contents on the display.
Fig. 48: LFT display – display of the firmware versions for the VMS5200 (Multicontroller)
NOTE! The HISTORY display is accessed in the same way via the corresponding button.
LFT display for the
VMS5200
(Multicontroller) only