14 ADVIA 2400 Operator’s Guide
For each measurement, the RRV moves the cuvettes in front of the
spectrophotometer.
10. Cell blank measurements are performed at each wavelength.
11. The RRV cuvettes are washed when measurement is complete.
12. When the analysis is complete, the lamp energy is checked at each wavelength.
Hardware Overview
1)
ISE location
2) Pure water bottle
3) Horizontal pumps
4) Vertical pumps
5) ISE buffer bottle
6) Reaction bath oil bottle
7) Isotonic saline diluent bottle
8) Cuvette detergent bottle
9) Cell conditioner bottle
10) Reaction bath oil heater
11) Refrigerator filter
12) Reaction bath oil pump
13) Reaction bath oil filter
14) Power panel
15) Display panel
Figure 1-2. Analyzer front view
To Next Page
Loading...
